Description
KIT 200 MAGNETS 50 mm
Kit 200 magnets 50 mm, to customize.
Each one of the pins 50mm is constituted by:
– an iron structure
– a polyester film
– a magnet
HOW DOES IT WORK
The first step is realize the graphics of your pins.
So, for 50mm pins, the diameter A should be of 61.1mm, the diameter B should be of 46mm.
STEP TWO
You need to print the graphics of your 50mm pins
When you have finished to print the graphics of your 50mm pins, you need only to trim them with our circle cutters.
STEP THREE
Assembly your 50mm pins
Now you need one of the press for pins.
