Description
KIT 100 MAGNETS 38 mm
Kit 100 magnets 38 mm, to customize.
Each one of the pins 38mm is constituted by:
– an iron structure
– a polyester film
– a magnet
HOW DOES IT WORK
The first step is realize the graphics of your pins.
So, for 38mm pins, the diameter A should be of 51mm, the diameter B should be of 37mm.
STEP TWO
You need to print the graphics of your 38mm pins
When you have finished to print the graphics of your 38mm pins, you need only to trim them with our circle cutters.
STEP THREE
Assembly your 38mm pins
Now you need one of the press for pins.
